Select Page

Palas FET 300 Test System for Medium Filter Elements

$0.00

The Palas FET 300 is a state-of-the-art test system designed for testing filter elements with a cross sectional area up to 300mm x 300mm. It is suitable for testing filter elements to many global standards and with PALAS’s proven technology, PALAS can count particles down to a very small size. The photometric total penetration is tested as well as the fractional separation efficiency. For example, the efficiency over the particle size or the particle size-dependent penetration. Differential pressure measurements and loading tests or gravimetric measurements based on different standards are also possible. For penetration measurements, the instrument works with different dust, salt, oil as well as latex aerosols over a size range from 20nm to 40 μm.

Description

The Palas FET 300 is a state-of-the-art test system designed for testing filter elements with a cross sectional area up to 300mm x 300mm. It is suitable for testing filter elements to many global standards and with PALAS’s proven technology, PALAS can count particles down to a very small size. The photometric total penetration is tested as well as the fractional separation efficiency. For example, the efficiency over the particle size or the particle size-dependent penetration.

Differential pressure measurements and loading tests or gravimetric measurements based on different standards are also possible. For penetration measurements, the instrument works with different dust, salt, oil as well as latex aerosols over a size range from 20nm to 40 μm. Thanks to individual adapters and customer-specific adaptations in the air duct, the Palas FET 300 system can be used for a wide variety of filter elements. Special designs and special functions are available on request.

 

Applicable Standards

  • ISO 16890
  • ISO 11155
  • ISO 5011
  • ASHRAE 52.2
  • ISO 29463-3/-5
  • EN 1822-3/-5

Key Features

  • 20nm to 40um wide particle size range
  • Measurement range (total penetration) up to 0.0005%
  • 1 to 27 m3/h volume flow
  • Differential pressure measurement
  • Suitable for testing a cross sectional area up to 300mm x 300mm
  • May be used with different aerosols (dusts, SAE dusts, salts, liquid aerosols, DEHS, latex particles and others

Flexibility

  • Customization of filter adapters, flow channel and measuring ranges possible for optimal test performance
  • Applicability of many test standards in one device
  • Optional testing of filter media and elements by simple adapter exchange

Speed of Testing

  • Simple exchange of filter elements for testing
  • Reliable quality assurance due to simple operation

Safety

  • Logged results based on relevant standards
  • Factory tested and calibrated test rigs

Typical Applications

  • Cabin filters
  • Hepa / Ulpa clean room filters
  • Room air filters
  • Cabin filters
  • Engine air filters
  • Compressor supply air filters

Specifications

https://www.palas.de/en/product/FETsystem

Downloads

Product Brochure: Palas FET System Brochure